Revizo / Cisco / 350-601

CISCO CERTIFICATION STUDY GUIDE

350-601 practice questions.
Prepare with a clearer plan.

Validates knowledge of implementing core data center technologies, including network, compute, storage, automation, and security.

Download Revizo
Revizo certification practice question on iPhone

What to know about 350-601.

Validates knowledge of implementing core data center technologies, including network, compute, storage, automation, and security.

Format
Multiple choice questions
Duration
120 minutes
Passing score
Pass/Fail
Recommended experience
Cisco CCNA or equivalent networking knowledge

Exam details are based on the available Cisco catalogue information. Confirm current requirements with the exam provider before booking.

How to prepare for 350-601.

Use the provider's current objectives as your source of truth, then organise your Revizo sessions around networking concepts, platform capabilities and operational decisions named in the certification. The 350-601 exam is listed as Multiple choice questions; your starting point should reflect Cisco CCNA or equivalent networking knowledge.

01

Map the official objectives.

Read the current Cisco objectives and make a short list of the areas you need to revisit before booking 350-601.

02

Practise one area at a time.

Select 350-601 in Revizo and use focused question sessions to test one topic or decision type at a time, rather than relying on a single long cram session.

03

Review, then repeat.

Use your results to return to incorrect answers, revisit the official material behind them and repeat short 350-601 practice sessions until the gaps are clearer.

FREE PRACTICE PREVIEW

Read the first 20
350-601 questions.

Review each question, its correct answer and any available source explanation before continuing your certification study in Revizo.

FIRST 20 QUESTIONS

Answers & available explanations

QUESTION 1

DRAG DROP -
An engineer is implementing NetFlow on a Cisco Nexus 7000 Series Switch.
Drag and drop the NetFlow commands from the left into the correct order they must be entered on the right.
Select and Place:

Item 1

  1. AA. N7K-1(config)# interface N7K-1(config-if)# ip flow monitor NetflowMonitor input
  2. BB. N7K-1(config)# feature netflow
  3. CC. N7K-1(config)# flow exporter NetflowMonitor N7K-1(config)# flow record NetflowMonitor
  4. DD. N7K-1(config)# flow monitor NetflowMonitor

Item 2

  1. AA. N7K-1(config)# interface N7K-1(config-if)# ip flow monitor NetflowMonitor input
  2. BB. N7K-1(config)# feature netflow
  3. CC. N7K-1(config)# flow exporter NetflowMonitor N7K-1(config)# flow record NetflowMonitor
  4. DD. N7K-1(config)# flow monitor NetflowMonitor

Item 3

  1. AA. N7K-1(config)# interface N7K-1(config-if)# ip flow monitor NetflowMonitor input
  2. BB. N7K-1(config)# feature netflow
  3. CC. N7K-1(config)# flow exporter NetflowMonitor N7K-1(config)# flow record NetflowMonitor
  4. DD. N7K-1(config)# flow monitor NetflowMonitor

Item 4

  1. AA. N7K-1(config)# interface N7K-1(config-if)# ip flow monitor NetflowMonitor input
  2. BB. N7K-1(config)# feature netflow
  3. CC. N7K-1(config)# flow exporter NetflowMonitor N7K-1(config)# flow record NetflowMonitor
  4. DD. N7K-1(config)# flow monitor NetflowMonitor
Show answer & explanation

Correct answer: Item 1: B · Item 2: C · Item 3: D · Item 4: A

ExplanationNX-OS flexible NetFlow order: feature netflow, flow record and exporter, flow monitor, then apply monitor on the interface (B,C,D,A). See https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus7000/sw/6-x/system_management/configuration/guide/bsm_n7k_6x/b_N7K_System_Management_Configuration_Guide_6x_chapter_01011.html

QUESTION 2

Which virtual MAC address is the default for HSRP version 2 group 10?

  1. AA. 0000.5E00.0110
  2. BB. 0000.0C9F.F00A
  3. CC. 3784.0898.1C0A
  4. DD. 0000.0C9F.F010
Show answer & explanation

Correct answer: B

ExplanationHSRPv2 virtual MAC 0000.0C9F.FXXX; group 10 (0x0A) gives 0000.0C9F.F00A. See https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/iproute_hsrp/configuration/xe-16/irg-hsrp-xe-16-book/config-hsrp.html

QUESTION 3

Refer to the exhibit.

Which statement about the ERSPAN configuration in this environment is true?

  1. AA. The session number of the source of ERSPAN spanned traffic must have a session ID of 47 for the traffic analyzer to receive the traffic.
  2. BB. Host B is the source of ERSPAN spanned traffic and host A is the traffic analyzer.
  3. CC. The session number of the source of ERSPAN spanned traffic must have a session ID of 48 for the traffic analyzer to receive the traffic.
  4. DD. Host A is the source of ERSPAN spanned traffic and host B is the traffic analyzer.
Show answer & explanation

Correct answer: D

ExplanationERSPAN source switch faces the monitored host; destination switch delivers mirrored traffic to the analyzer host. See https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus9000/sw/7-x/system_management/configuration/guide/b-cisco-nexus-9000-series-nx-os-system-management-configuration-guide-7x/b-cisco-nexus-9000-series-nx-os-system-management-configuration-guide-7x_chapter_010101.html

QUESTION 4

Refer to the exhibit.

Which two statements about the routing table of the leaf switch are true? (Choose two.)

  1. AA. 10.20.1.0/24 is a BD subnet in ACI.
  2. BB. The next hop 10.0.1.14 for route 172.16.99.0/24 is the TEP address of a border leaf in ACI.
  3. CC. 172.16.100.0/24 is a BD subnet in ACI.
  4. DD. The next hop 10.1.168.95 for route 172.16.100.0/24 is the TEP address of a border leaf in ACI.
  5. EE. The next hop 10.0.8.65 for route 10.20.1.0/24 is the TEP address of a border leaf in ACI.
Show answer & explanation

Correct answer: A, D

Explanation10.20.1.0/24 is a local BD subnet; 172.16.100.0/24 is reached via border-leaf TEP 10.1.168.95 (A and D). See https://www.cisco.com/c/en/us/td/docs/switches/datacenter/aci/apic/sw/kb/b-kb-aci-microsegmentation.html

QUESTION 5

Which mroute state is created when Bidirectional PIM is deployed at a site?

  1. AA. *,G
  2. BB. MVPN Type-6
  3. CC. MVPN Type-7
  4. DD. S,G
Show answer & explanation

Correct answer: A

ExplanationBidirectional PIM maintains only (*,G) state, not (S,G). See https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/ipmulti_pim/configuration/xe-16-5/imc-pim-xe-16-5-book/imc-tech-oview.html

QUESTION 6

Refer to the exhibit.

Which statement about the default gateway configuration of the vPC is true?

  1. AA. Either switch can act as the active default gateway.
  2. BB. N7K-1 acts as the default gateway for all traffic.
  3. CC. N7K-2 forwards traffic that is destined for the default gateway by using the peer link.
  4. DD. N7K-2 acts as the default gateway for all traffic.
Show answer & explanation

Correct answer: A

ExplanationWith vPC peer-gateway, either peer may forward as default gateway. See https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus7000/sw/vpc/configuration/b-cisco-nexus-7000-series-nx-os-vpc-configuration-guide/b-cisco-nexus-7000-series-nx-os-vpc-configuration-guide_chapter_01011.html

QUESTION 7

Refer to the exhibit.

What must be connected to clear the HA NOT READY status?

  1. AA. Layer 1-Layer 2 ports
  2. BB. server chassis
  3. CC. management ports
  4. DD. network uplinks
Show answer & explanation

Correct answer: B

ExplanationUCS FI HA needs a discovered chassis for cluster heartbeat before HA is ready. See https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/sw/gui/config/guide/4_1/b_Cisco_UCS_GUI_Configuration_Guide_4_1/b_Cisco_UCS_GUI_Configuration_Guide_4_1_chapter_01101.html

QUESTION 8

A small remote office is set to connect to the regional hub site via NSSA ASBR.
Which type of LSA is sent to the remote office OSPF area?

  1. AA. type 7 LSA
  2. BB. type 1 LSA
  3. CC. type 5 LSA
  4. DD. type 3 LSA
Show answer & explanation

Correct answer: A

ExplanationNSSA ASBR injects external routes as Type 7 LSAs. See https://www.cisco.com/c/en/us/support/docs/ip/open-shortest-path-first-ospf/7039-1.html

QUESTION 9

Which adjacency server configuration makes two OTV edge devices located in the same site bring up the dual-site adjacency?

  1. AA.
  2. BB.
  3. CC.
  4. DD.
Show answer & explanation

Correct answer: A

ExplanationDual-site OTV unicast adjacency requires mutual adjacency-server pointing to peer IP. See https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus7000/sw/otv/configuration/b-cisco-nexus-7000-series-nx-os-otv-configuration-guide/b-cisco-nexus-7000-series-nx-os-otv-configuration-guide_chapter_01011.html

QUESTION 10

Refer to the exhibit.

The STP priority of N7K-1 and N7K-2 are the lowest in the network.
Which statement describes STP on the vPC?

  1. AA. N7K-1 and N7K-2 appear as a single STP root.
  2. BB. N7K-1 appears as the STP root.
  3. CC. N7K-1 preempts N7K-2 as the STP root.
  4. DD. N7K-2 appears as the STP root.
Show answer & explanation

Correct answer: A

Explanationpeer-switch makes both vPC peers appear as one STP root. See https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus7000/sw/vpc/configuration/b-cisco-nexus-7000-series-nx-os-vpc-configuration-guide/b-cisco-nexus-7000-series-nx-os-vpc-configuration-guide_chapter_01011.html

QUESTION 11

The engineer must configure SPAN on a Cisco Nexus 5000 Series Switch to get a capture of the traffic from these applications for an in-depth packet analysis.
Which two SPAN characteristics must be considered? (Choose two.)

  1. AA. SPAN source ports can be monitored in multiple SPAN sessions.
  2. BB. The Ethernet, FC, vFC, port channel, SAN port channel can be used as SPAN source ports.
  3. CC. A SPAN source port cannot be a destination SPAN port.
  4. DD. Only Ethernet, FC, vFC, port channel port types can be used as SPAN source ports.
  5. EE. The rx/tx option is available for VLAN or VSAN SPAN sessions.
Show answer & explanation

Correct answer: B, C

ExplanationN5K SPAN: valid source types include FC/Ethernet port-channels; destination ports cannot be sources. See https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus9000/sw/7-x/system_management/configuration/guide/b-cisco-nexus-9000-series-nx-os-system-management-configuration-guide-7x/b-cisco-nexus-9000-series-nx-os-system-management-configuration-guide-7x_chapter_010101.html

QUESTION 12

Host1 is in VLAN100 located in DataCenter1 and Host2 is in VLAN200 located in DataCenter2.
Which OTV VLAN mapping configuration allows Layer 2 connectivity between these two hosts?

  1. AA.
  2. BB.
  3. CC.
  4. DD.
Show answer & explanation

Correct answer: B

ExplanationOTV VLAN mapping extends VLAN100 in DC1 to VLAN200 in DC2 for L2 reachability. See https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus7000/sw/otv/configuration/b-cisco-nexus-7000-series-nx-os-otv-configuration-guide/b-cisco-nexus-7000-series-nx-os-otv-configuration-guide_chapter_01011.html

QUESTION 13

Refer to the exhibit.

What is configured as a result of running these commands?

  1. AA. loose unicast RPF
  2. BB. strict unicast RPF
  3. CC. IP Source Guard
  4. DD. reverse lookup for outbound packets
Show answer & explanation

Correct answer: B

Explanationip verify unicast source reachable-via rx is strict uRPF. See https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus9000/sw/7-x/system_management/configuration/guide/b-cisco-nexus-9000-series-nx-os-system-management-configuration-guide-7x/b-cisco-nexus-9000-series-nx-os-system-management-configuration-guide-7x_chapter_010101.html

QUESTION 14

Which configuration implements static ingress replication?

  1. AA.
  2. BB.
  3. CC.
  4. DD.
Show answer & explanation

Correct answer: D

ExplanationStatic ingress replication uses ingress-replication protocol static peer-ip under NVE VNI. See https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus9000/sw/7-x/system_management/configuration/guide/b-cisco-nexus-9000-series-nx-os-system-management-configuration-guide-7x/b-cisco-nexus-9000-series-nx-os-system-management-configuration-guide-7x_chapter_010101.html

QUESTION 15

Refer to the exhibit.

A network engineer is setting up a multihomed OTV network. The first site has been set up with a primary and secondary adjacency server.
Which configuration must be added on the remote OTV AEDs site?

  1. AA.
  2. BB.
  3. CC.
  4. DD.
Show answer & explanation

Correct answer: D

ExplanationRemote OTV sites list primary and secondary adjacency servers. See https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus7000/sw/otv/configuration/b-cisco-nexus-7000-series-nx-os-otv-configuration-guide/b-cisco-nexus-7000-series-nx-os-otv-configuration-guide_chapter_01011.html

QUESTION 16

A customer has a requirement to deploy a cloud service and needs to have full control over the underlying OS, data and applications.
Which cloud model meets this requirement?

  1. AA. MaaS
  2. BB. PaaS
  3. CC. SaaS
  4. DD. IaaS
Show answer & explanation

Correct answer: D

ExplanationIaaS gives tenant control of OS, apps, and data. See https://www.cisco.com/c/en/us/solutions/cloud-computing/what-is-cloud-computing.html

QUESTION 17

Refer to the exhibit.

A flapping link issue has been reported on the vPC keepalive link. A packet capture has been activated on the Cisco Nexus switch.
What is the destination IP address of the vPC keepalive packets that are sent by the switch?

  1. AA. 192.168.254.4
  2. BB. 192.168.254.1
  3. CC. 192.168.254.2
  4. DD. 239.255.70.83
Show answer & explanation

Correct answer: A

ExplanationvPC keepalive is UDP 3200 to the configured peer destination IP. See https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus7000/sw/vpc/configuration/b-cisco-nexus-7000-series-nx-os-vpc-configuration-guide/b-cisco-nexus-7000-series-nx-os-vpc-configuration-guide_chapter_01011.html

QUESTION 18

Due to a major version change, an engineer must perform a software upgrade on a Cisco Nexus Series switch.
Which two technologies should be implemented to reduce disruptions to the network during the upgrade? (Choose two.)

  1. AA. vPC
  2. BB. HSRP
  3. CC. VDC
  4. DD. MLAG
  5. EE. PAgP
Show answer & explanation

Correct answer: A, B

ExplanationvPC and HSRP allow upgrade with redundant path; VDC upgrades are not per-VDC isolated. See https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus7000/sw/vpc/configuration/b-cisco-nexus-7000-series-nx-os-vpc-configuration-guide/b-cisco-nexus-7000-series-nx-os-vpc-configuration-guide_chapter_01011.html

QUESTION 19

Refer to the exhibit.

What is the result of running the command presented?

  1. AA. Multicast traffic forwarding is suspended.
  2. BB. MRIB is flushed.
  3. CC. The PIM database is deleted.
  4. DD. PIM join messages are suspended.
Show answer & explanation

Correct answer: C

Explanationclear ip pim route deletes the PIM database while MRIB forwarding continues briefly. See https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/ipmulti_pim/configuration/xe-16-5/imc-pim-xe-16-5-book/imc-tech-oview.html

QUESTION 20

Refer to the exhibit.

What is the reason the system-fm-vrrp checkpoint was created?

  1. AA. The VRRP process crashed and the checkpoint was automatically created.
  2. BB. The VRRP service restarted and the checkpoint was automatically created.
  3. CC. The network administrator manually created it.
  4. DD. The VRRP-enabled feature has been disabled.
Show answer & explanation

Correct answer: D

ExplanationDisabling VRRP feature creates system-fm-vrrp checkpoint. See https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus9000/sw/7-x/system_management/configuration/guide/b-cisco-nexus-9000-series-nx-os-system-management-configuration-guide-7x/b-cisco-nexus-9000-series-nx-os-system-management-configuration-guide-7x_chapter_010101.html

Build a focused 350-601 practice routine.

Choose 350-601 in Revizo and work through original, question-by-question practice on your iPhone. Review results, revisit what needs attention and keep your next session tied to one specific certification objective.

Practise 350-601 with Revizo

350-601 practice questions.

Is Revizo the official Cisco exam?

No. Revizo is an independent iPhone app for certification practice. Refer to the provider's official resources for current exam policies and registration.

How should I use these 350-601 practice questions?

Use the exam code to select the matching certification in Revizo, then build short, focused sessions around the areas you want to review.

Are Revizo questions copied from live examinations?

No. Revizo provides original practice questions for certification study. Use the provider's official objectives, documentation and policies as the source of truth for your preparation.

What should I use alongside 350-601 practice questions?

Use the current Cisco objectives, documentation and registration guidance as your source of truth. Revizo is designed to support focused practice, not replace the provider's official materials.

Where can I confirm current 350-601 requirements?

Check the official Cisco exam page for the latest objectives, registration details and policies.