Revizo / Microsoft / AB-410

MICROSOFT CERTIFICATION STUDY GUIDE

AB-410 practice questions.
Prepare with a clearer plan.

Validates ability to design, build, and implement AI-powered solutions using Microsoft Power Platform, including Copilot, low-code tools, Dataverse, Power Apps, Power Automate, Power Pages, Copilot Studio, and AI Builder.

Download Revizo
Revizo certification practice question on iPhone

What to know about AB-410.

Validates ability to design, build, and implement AI-powered solutions using Microsoft Power Platform, including Copilot, low-code tools, Dataverse, Power Apps, Power Automate, Power Pages, Copilot Studio, and AI Builder.

Format
Multiple choice and scenario-based questions (single and multiple response)
Duration
120 minutes
Passing score
700/1000
Recommended experience
Experience with Power Platform, Dataverse, Power Apps, Power Automate, Copilot Studio, and AI Builder

Exam details are based on the available Microsoft catalogue information. Confirm current requirements with the exam provider before booking.

How to prepare for AB-410.

Use the provider's current objectives as your source of truth, then organise your Revizo sessions around the Microsoft technologies, product capabilities and implementation decisions named in the certification. The AB-410 exam is listed as Multiple choice and scenario-based questions (single and multiple response); your starting point should reflect Experience with Power Platform, Dataverse, Power Apps, Power Automate, Copilot Studio, and AI Builder.

01

Map the official objectives.

Read the current Microsoft objectives and make a short list of the areas you need to revisit before booking AB-410.

02

Practise one area at a time.

Select AB-410 in Revizo and use focused question sessions to test one topic or decision type at a time, rather than relying on a single long cram session.

03

Review, then repeat.

Use your results to return to incorrect answers, revisit the official material behind them and repeat short AB-410 practice sessions until the gaps are clearer.

FREE PRACTICE PREVIEW

Read the first 20
AB-410 questions.

Review each question, its correct answer and any available source explanation before continuing your certification study in Revizo.

FIRST 20 QUESTIONS

Answers & available explanations

QUESTION 1

This is a case study. Case studies are not timed separately from other exam sections. You can use as much exam time as you would like to complete each case study. However, there might be additional case studies or other exam sections. Manage your time to ensure that you can complete all the exam sections in the time provided. Pay attention to the Exam Progress at the top of the screen so you have sufficient time to complete any exam sections that follow this case study.
To answer the case study questions, you will need to reference information that is provided in the case. Case studies and associated questions might contain exhibits or other resources that provide more information about the scenario described in the case. Information provided in an individual question does not apply to the other questions in the case study.
A Review Screen will appear at the end of this case study. From the Review Screen, you can review and change your answers before you move to the next exam section. After you leave this case study, you will NOT be able to return to it.

To start the case study -
To display the first question in this case study, select the “Next” button. To the left of the question, a menu provides links to information such as business requirements, the existing environment, and problem statements. Please read through all this information before answering any questions. When you are ready to answer a question, select the “Question” button to return to the question.

Background -
Contoso Ltd. is a global renewable energy provider that operates wind farms and solar installations. The company is modernizing its maintenance and operations platform. The company plans to implement a Microsoft Power Platform solution for the operations team. The implementation will include Microsoft Dataverse, a model-driven app, and Power Automate cloud flows.
The company is building and testing a new model-driven app named Operations. The solution will support operations managers, regional coordinators, and field technicians. The app must integrate with an external cloud-based system that manages onboarding of field technicians.
Contoso Ltd. plans to improve data quality and enforce consistent business logic across the app and automation processes.

Technical environment -
Contoso Ltd. has an Identity and Access Management (IDAM) department that manages security. The company has one Power Platform environment named Production, where all building and configuration take place. Auditing is disabled.
The Production environment has the following security configurations:
IDAM has a Microsoft Entra security group named Contoso Ltd. QA. This security group will assign all members a Power Apps license.
IDAM created a Quality Assurance security role that grants read and write access to all custom tables.
IDAM also created a team named Testers in Dataverse, of a Microsoft Entra group team type. The team is configured for the Contoso Ltd. QA security group. The Testers team is assigned the Quality Assurance security role.

Microsoft 365 environment -
All Contoso Ltd. managers are included in a Microsoft 365 group named Managers. The group is NOT enabled for email.
The company shares a SharePoint list with a key customer: Alpine Ski House. Alpine Ski House staff members can add new maintenance requests, which are then checked and marked as reviewed by Contoso Ltd.
Current issue:
A new QA tester joins Contoso Ltd. The IDAM department adds the new tester to the Contoso Ltd. QA security group. However, the new tester is not listed in the Testers team as a member.
Other applications:
A separate software-as a-service (SaaS) solution named TechCheck manages technician onboarding. The TechCheck solution is set up as follows:
TechCheck assigns a unique number named Ref to all technicians.
Users cannot make changes to the TechCheck data model.
Users cannot use the same TechCheck ref on more than one Technician row.

Automation requirements -
Contoso plans to use Power Automate to develop a Maintenance Request Approval flow. The flow must meet the following requirements:
Create a Maintenance Request row in Dataverse when either of the following occurs:
An item is added to the SharePoint list by the customer with the Priority property set to High.
Any item is checked and marked as reviewed by a Contoso Ltd. representative.
Seek maintenance request approvals from managers through both email and a Microsoft Teams message after they have been reviewed:
Requests require approval from all managers.
If one manager rejects the request, approval must not be granted.
The result of the approval request must be sent to the initial reviewer in an email. The subject line must set the response as either Approve or Reject.
Contoso Ltd. requires the following table logic:
If a user tries to enter a price greater than the cost on a new Asset row, the row must display an inline error message.
If a user tries to save changes to a Technician row where the TechCheck ref column is empty, the action must be prevented and a message explaining the action must be displayed.
Any updates made to Technician profiles in TechCheck must be mirrored in Dataverse by using a custom integration. The developers building the integration require an index for performant searches on the Technician table.

Data model and app design -
Contoso Ltd. plans to use Dataverse as its central data platform. Log storage must be minimized.

Tables -
The following tables are required for data modeling and the app design:
Assets: Stores information about solar panels and wind turbines
Maintenance Requests: Tracks issues and maintenance activities. The table must include the following columns:
Request ID (auto-number)
External Request Code (text)

Assigned -
Technician (lookup to Technicians)
Report (lookup to Maintenance Reports)
Technician updated (Yes/No)
Maintenance Reports: Tracks the results of maintenance reports
Technicians: Stores technician assignment data. The table must include the following columns:
Full Name (Text)
Mobile phone number (Text)
Email (Text)
Seniority (Choice)
TechCheck ref (Text)

Data modeling -
The data model must provide the following functionality:
Maintenance Requests must:
be uniquely identifiable across systems.
have two inactive statuses, Cancelled and Duplicate.
If a new option is added to an existing set of options, it must be made available automatically for selection on all columns that use the set.
A new column named Priority must be added to multiple tables. Users must be able to select only one option from the following set per row:

Low -

Medium -

High -

Critical -
Changes to the Technician column on Maintenance Requests must be tracked for compliance purposes. Rows must include the names of previous and current technicians and the time of the change.

Relationship requirements -
One asset can be related to many maintenance requests. A maintenance request can have many assets.
A maintenance request can have only zero or one maintenance report.
Only one Technician can be related to a Maintenance Request at a time.
When a Maintenance Request is deleted, any Maintenance Reports associated with it must also be deleted, but this action should be prevented if there is value in the Technician lookup.
When a Maintenance Request is assigned to a different owner, the Maintenance Report associated with it must be reassigned to the new owner as well, but the associated Technician should stay with the current owner.

App design -
The Technicians table contains the following public views:

Senior Technicians -

Junior Technicians -
The Senior Technician view must be available through the table list view selector to a set of specific users only.
A tester creates a personal view named Hot Assets on the Assets table. The tester recognizes that the view is useful for the entire testing team. The view must be made accessible to the team.
You need to add the Priority column to the Maintenance Request table.
Which column type should you use?

  1. AA. local choice
  2. BB. global choice
  3. CC. status reason
  4. DD. formula
Show answer & explanation

Correct answer: B

ExplanationA global choice lets the same Priority options be reused across multiple tables and automatically stay in sync when options change.
Reference:
https://learn.microsoft.com/en-us/power-apps/maker/data-platform/create-edit-global-option-sets

QUESTION 2

DRAG DROP -
This is a case study. Case studies are not timed separately from other exam sections. You can use as much exam time as you would like to complete each case study. However, there might be additional case studies or other exam sections. Manage your time to ensure that you can complete all the exam sections in the time provided. Pay attention to the Exam Progress at the top of the screen so you have sufficient time to complete any exam sections that follow this case study.
To answer the case study questions, you will need to reference information that is provided in the case. Case studies and associated questions might contain exhibits or other resources that provide more information about the scenario described in the case. Information provided in an individual question does not apply to the other questions in the case study.
A Review Screen will appear at the end of this case study. From the Review Screen, you can review and change your answers before you move to the next exam section. After you leave this case study, you will NOT be able to return to it.

To start the case study -
To display the first question in this case study, select the “Next” button. To the left of the question, a menu provides links to information such as business requirements, the existing environment, and problem statements. Please read through all this information before answering any questions. When you are ready to answer a question, select the “Question” button to return to the question.

Background -
Contoso Ltd. is a global renewable energy provider that operates wind farms and solar installations. The company is modernizing its maintenance and operations platform. The company plans to implement a Microsoft Power Platform solution for the operations team. The implementation will include Microsoft Dataverse, a model-driven app, and Power Automate cloud flows.
The company is building and testing a new model-driven app named Operations. The solution will support operations managers, regional coordinators, and field technicians. The app must integrate with an external cloud-based system that manages onboarding of field technicians.
Contoso Ltd. plans to improve data quality and enforce consistent business logic across the app and automation processes.

Technical environment -
Contoso Ltd. has an Identity and Access Management (IDAM) department that manages security. The company has one Power Platform environment named Production, where all building and configuration take place. Auditing is disabled.
The Production environment has the following security configurations:
IDAM has a Microsoft Entra security group named Contoso Ltd. QA. This security group will assign all members a Power Apps license.
IDAM created a Quality Assurance security role that grants read and write access to all custom tables.
IDAM also created a team named Testers in Dataverse, of a Microsoft Entra group team type. The team is configured for the Contoso Ltd. QA security group. The Testers team is assigned the Quality Assurance security role.

Microsoft 365 environment -
All Contoso Ltd. managers are included in a Microsoft 365 group named Managers. The group is NOT enabled for email.
The company shares a SharePoint list with a key customer: Alpine Ski House. Alpine Ski House staff members can add new maintenance requests, which are then checked and marked as reviewed by Contoso Ltd.
Current issue:
A new QA tester joins Contoso Ltd. The IDAM department adds the new tester to the Contoso Ltd. QA security group. However, the new tester is not listed in the Testers team as a member.
Other applications:
A separate software-as a-service (SaaS) solution named TechCheck manages technician onboarding. The TechCheck solution is set up as follows:
TechCheck assigns a unique number named Ref to all technicians.
Users cannot make changes to the TechCheck data model.
Users cannot use the same TechCheck ref on more than one Technician row.

Automation requirements -
Contoso plans to use Power Automate to develop a Maintenance Request Approval flow. The flow must meet the following requirements:
Create a Maintenance Request row in Dataverse when either of the following occurs:
An item is added to the SharePoint list by the customer with the Priority property set to High.
Any item is checked and marked as reviewed by a Contoso Ltd. representative.
Seek maintenance request approvals from managers through both email and a Microsoft Teams message after they have been reviewed:
Requests require approval from all managers.
If one manager rejects the request, approval must not be granted.
The result of the approval request must be sent to the initial reviewer in an email. The subject line must set the response as either Approve or Reject.
Contoso Ltd. requires the following table logic:
If a user tries to enter a price greater than the cost on a new Asset row, the row must display an inline error message.
If a user tries to save changes to a Technician row where the TechCheck ref column is empty, the action must be prevented and a message explaining the action must be displayed.
Any updates made to Technician profiles in TechCheck must be mirrored in Dataverse by using a custom integration. The developers building the integration require an index for performant searches on the Technician table.

Data model and app design -
Contoso Ltd. plans to use Dataverse as its central data platform. Log storage must be minimized.

Tables -
The following tables are required for data modeling and the app design:
Assets: Stores information about solar panels and wind turbines
Maintenance Requests: Tracks issues and maintenance activities. The table must include the following columns:
Request ID (auto-number)
External Request Code (text)

Assigned -
Technician (lookup to Technicians)
Report (lookup to Maintenance Reports)
Technician updated (Yes/No)
Maintenance Reports: Tracks the results of maintenance reports
Technicians: Stores technician assignment data. The table must include the following columns:
Full Name (Text)
Mobile phone number (Text)
Email (Text)
Seniority (Choice)
TechCheck ref (Text)

Data modeling -
The data model must provide the following functionality:
Maintenance Requests must:
be uniquely identifiable across systems.
have two inactive statuses, Cancelled and Duplicate.
If a new option is added to an existing set of options, it must be made available automatically for selection on all columns that use the set.
A new column named Priority must be added to multiple tables. Users must be able to select only one option from the following set per row:

Low -

Medium -

High -

Critical -
Changes to the Technician column on Maintenance Requests must be tracked for compliance purposes. Rows must include the names of previous and current technicians and the time of the change.

Relationship requirements -
One asset can be related to many maintenance requests. A maintenance request can have many assets.
A maintenance request can have only zero or one maintenance report.
Only one Technician can be related to a Maintenance Request at a time.
When a Maintenance Request is deleted, any Maintenance Reports associated with it must also be deleted, but this action should be prevented if there is value in the Technician lookup.
When a Maintenance Request is assigned to a different owner, the Maintenance Report associated with it must be reassigned to the new owner as well, but the associated Technician should stay with the current owner.

App design -
The Technicians table contains the following public views:

Senior Technicians -

Junior Technicians -
The Senior Technician view must be available through the table list view selector to a set of specific users only.
A tester creates a personal view named Hot Assets on the Assets table. The tester recognizes that the view is useful for the entire testing team. The view must be made accessible to the team.
You need to configure the Maintenance Request relationships to the other tables.
Which type of relationship behavior should you set? To answer, move the appropriate behavior types to the correct tables. You may use each behavior type once, more than once, or not at all. You may need to move the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.

Item 1

  1. AA. Parental
  2. BB. Referential, Remove Link
  3. CC. Referential, Restrict Delete

Item 2

  1. AA. Parental
  2. BB. Referential, Remove Link
  3. CC. Referential, Restrict Delete
Show answer & explanation

Correct answer: Item 1: A · Item 2: B

ExplanationMaintenance Report should use Parental behavior so related reports are deleted and reassigned with the parent Maintenance Request. Technician should use Referential, Remove Link so technician ownership does not cascade when the Maintenance Request owner changes.
Reference:
https://learn.microsoft.com/en-us/power-apps/maker/data-platform/create-edit-entity-relationships

QUESTION 3

DRAG DROP -
This is a case study. Case studies are not timed separately from other exam sections. You can use as much exam time as you would like to complete each case study. However, there might be additional case studies or other exam sections. Manage your time to ensure that you can complete all the exam sections in the time provided. Pay attention to the Exam Progress at the top of the screen so you have sufficient time to complete any exam sections that follow this case study.
To answer the case study questions, you will need to reference information that is provided in the case. Case studies and associated questions might contain exhibits or other resources that provide more information about the scenario described in the case. Information provided in an individual question does not apply to the other questions in the case study.
A Review Screen will appear at the end of this case study. From the Review Screen, you can review and change your answers before you move to the next exam section. After you leave this case study, you will NOT be able to return to it.

To start the case study -
To display the first question in this case study, select the “Next” button. To the left of the question, a menu provides links to information such as business requirements, the existing environment, and problem statements. Please read through all this information before answering any questions. When you are ready to answer a question, select the “Question” button to return to the question.

Background -
Contoso Ltd. is a global renewable energy provider that operates wind farms and solar installations. The company is modernizing its maintenance and operations platform. The company plans to implement a Microsoft Power Platform solution for the operations team. The implementation will include Microsoft Dataverse, a model-driven app, and Power Automate cloud flows.
The company is building and testing a new model-driven app named Operations. The solution will support operations managers, regional coordinators, and field technicians. The app must integrate with an external cloud-based system that manages onboarding of field technicians.
Contoso Ltd. plans to improve data quality and enforce consistent business logic across the app and automation processes.

Technical environment -
Contoso Ltd. has an Identity and Access Management (IDAM) department that manages security. The company has one Power Platform environment named Production, where all building and configuration take place. Auditing is disabled.
The Production environment has the following security configurations:
IDAM has a Microsoft Entra security group named Contoso Ltd. QA. This security group will assign all members a Power Apps license.
IDAM created a Quality Assurance security role that grants read and write access to all custom tables.
IDAM also created a team named Testers in Dataverse, of a Microsoft Entra group team type. The team is configured for the Contoso Ltd. QA security group. The Testers team is assigned the Quality Assurance security role.

Microsoft 365 environment -
All Contoso Ltd. managers are included in a Microsoft 365 group named Managers. The group is NOT enabled for email.
The company shares a SharePoint list with a key customer: Alpine Ski House. Alpine Ski House staff members can add new maintenance requests, which are then checked and marked as reviewed by Contoso Ltd.
Current issue:
A new QA tester joins Contoso Ltd. The IDAM department adds the new tester to the Contoso Ltd. QA security group. However, the new tester is not listed in the Testers team as a member.
Other applications:
A separate software-as a-service (SaaS) solution named TechCheck manages technician onboarding. The TechCheck solution is set up as follows:
TechCheck assigns a unique number named Ref to all technicians.
Users cannot make changes to the TechCheck data model.
Users cannot use the same TechCheck ref on more than one Technician row.

Automation requirements -
Contoso plans to use Power Automate to develop a Maintenance Request Approval flow. The flow must meet the following requirements:
Create a Maintenance Request row in Dataverse when either of the following occurs:
An item is added to the SharePoint list by the customer with the Priority property set to High.
Any item is checked and marked as reviewed by a Contoso Ltd. representative.
Seek maintenance request approvals from managers through both email and a Microsoft Teams message after they have been reviewed:
Requests require approval from all managers.
If one manager rejects the request, approval must not be granted.
The result of the approval request must be sent to the initial reviewer in an email. The subject line must set the response as either Approve or Reject.
Contoso Ltd. requires the following table logic:
If a user tries to enter a price greater than the cost on a new Asset row, the row must display an inline error message.
If a user tries to save changes to a Technician row where the TechCheck ref column is empty, the action must be prevented and a message explaining the action must be displayed.
Any updates made to Technician profiles in TechCheck must be mirrored in Dataverse by using a custom integration. The developers building the integration require an index for performant searches on the Technician table.

Data model and app design -
Contoso Ltd. plans to use Dataverse as its central data platform. Log storage must be minimized.

Tables -
The following tables are required for data modeling and the app design:
Assets: Stores information about solar panels and wind turbines
Maintenance Requests: Tracks issues and maintenance activities. The table must include the following columns:
Request ID (auto-number)
External Request Code (text)

Assigned -
Technician (lookup to Technicians)
Report (lookup to Maintenance Reports)
Technician updated (Yes/No)
Maintenance Reports: Tracks the results of maintenance reports
Technicians: Stores technician assignment data. The table must include the following columns:
Full Name (Text)
Mobile phone number (Text)
Email (Text)
Seniority (Choice)
TechCheck ref (Text)

Data modeling -
The data model must provide the following functionality:
Maintenance Requests must:
be uniquely identifiable across systems.
have two inactive statuses, Cancelled and Duplicate.
If a new option is added to an existing set of options, it must be made available automatically for selection on all columns that use the set.
A new column named Priority must be added to multiple tables. Users must be able to select only one option from the following set per row:

Low -

Medium -

High -

Critical -
Changes to the Technician column on Maintenance Requests must be tracked for compliance purposes. Rows must include the names of previous and current technicians and the time of the change.

Relationship requirements -
One asset can be related to many maintenance requests. A maintenance request can have many assets.
A maintenance request can have only zero or one maintenance report.
Only one Technician can be related to a Maintenance Request at a time.
When a Maintenance Request is deleted, any Maintenance Reports associated with it must also be deleted, but this action should be prevented if there is value in the Technician lookup.
When a Maintenance Request is assigned to a different owner, the Maintenance Report associated with it must be reassigned to the new owner as well, but the associated Technician should stay with the current owner.

App design -
The Technicians table contains the following public views:

Senior Technicians -

Junior Technicians -
The Senior Technician view must be available through the table list view selector to a set of specific users only.
A tester creates a personal view named Hot Assets on the Assets table. The tester recognizes that the view is useful for the entire testing team. The view must be made accessible to the team.
You need to configure the access requirements to the views.
Which configurations should you use? To answer, move the appropriate configurations to the correct views. You may use each configuration once, more than once, or not at all. You may need to move the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.

Item 1

  1. AA. Sharing
  2. BB. Owner teams
  3. CC. Security roles
  4. DD. Business units

Item 2

  1. AA. Sharing
  2. BB. Owner teams
  3. CC. Security roles
  4. DD. Business units
Show answer & explanation

Correct answer: Item 1: C · Item 2: A

ExplanationRestrict the Senior Technicians public view to specific users with security roles. Share the personal Hot Assets view with the testing team using view sharing.
Reference:
https://learn.microsoft.com/en-us/power-apps/maker/model-driven-apps/share-model-driven-app

QUESTION 4

This is a case study. Case studies are not timed separately from other exam sections. You can use as much exam time as you would like to complete each case study. However, there might be additional case studies or other exam sections. Manage your time to ensure that you can complete all the exam sections in the time provided. Pay attention to the Exam Progress at the top of the screen so you have sufficient time to complete any exam sections that follow this case study.
To answer the case study questions, you will need to reference information that is provided in the case. Case studies and associated questions might contain exhibits or other resources that provide more information about the scenario described in the case. Information provided in an individual question does not apply to the other questions in the case study.
A Review Screen will appear at the end of this case study. From the Review Screen, you can review and change your answers before you move to the next exam section. After you leave this case study, you will NOT be able to return to it.

To start the case study -
To display the first question in this case study, select the “Next” button. To the left of the question, a menu provides links to information such as business requirements, the existing environment, and problem statements. Please read through all this information before answering any questions. When you are ready to answer a question, select the “Question” button to return to the question.

Background -
Contoso Ltd. is a global renewable energy provider that operates wind farms and solar installations. The company is modernizing its maintenance and operations platform. The company plans to implement a Microsoft Power Platform solution for the operations team. The implementation will include Microsoft Dataverse, a model-driven app, and Power Automate cloud flows.
The company is building and testing a new model-driven app named Operations. The solution will support operations managers, regional coordinators, and field technicians. The app must integrate with an external cloud-based system that manages onboarding of field technicians.
Contoso Ltd. plans to improve data quality and enforce consistent business logic across the app and automation processes.

Technical environment -
Contoso Ltd. has an Identity and Access Management (IDAM) department that manages security. The company has one Power Platform environment named Production, where all building and configuration take place. Auditing is disabled.
The Production environment has the following security configurations:
IDAM has a Microsoft Entra security group named Contoso Ltd. QA. This security group will assign all members a Power Apps license.
IDAM created a Quality Assurance security role that grants read and write access to all custom tables.
IDAM also created a team named Testers in Dataverse, of a Microsoft Entra group team type. The team is configured for the Contoso Ltd. QA security group. The Testers team is assigned the Quality Assurance security role.

Microsoft 365 environment -
All Contoso Ltd. managers are included in a Microsoft 365 group named Managers. The group is NOT enabled for email.
The company shares a SharePoint list with a key customer: Alpine Ski House. Alpine Ski House staff members can add new maintenance requests, which are then checked and marked as reviewed by Contoso Ltd.
Current issue:
A new QA tester joins Contoso Ltd. The IDAM department adds the new tester to the Contoso Ltd. QA security group. However, the new tester is not listed in the Testers team as a member.
Other applications:
A separate software-as a-service (SaaS) solution named TechCheck manages technician onboarding. The TechCheck solution is set up as follows:
TechCheck assigns a unique number named Ref to all technicians.
Users cannot make changes to the TechCheck data model.
Users cannot use the same TechCheck ref on more than one Technician row.

Automation requirements -
Contoso plans to use Power Automate to develop a Maintenance Request Approval flow. The flow must meet the following requirements:
Create a Maintenance Request row in Dataverse when either of the following occurs:
An item is added to the SharePoint list by the customer with the Priority property set to High.
Any item is checked and marked as reviewed by a Contoso Ltd. representative.
Seek maintenance request approvals from managers through both email and a Microsoft Teams message after they have been reviewed:
Requests require approval from all managers.
If one manager rejects the request, approval must not be granted.
The result of the approval request must be sent to the initial reviewer in an email. The subject line must set the response as either Approve or Reject.
Contoso Ltd. requires the following table logic:
If a user tries to enter a price greater than the cost on a new Asset row, the row must display an inline error message.
If a user tries to save changes to a Technician row where the TechCheck ref column is empty, the action must be prevented and a message explaining the action must be displayed.
Any updates made to Technician profiles in TechCheck must be mirrored in Dataverse by using a custom integration. The developers building the integration require an index for performant searches on the Technician table.

Data model and app design -
Contoso Ltd. plans to use Dataverse as its central data platform. Log storage must be minimized.

Tables -
The following tables are required for data modeling and the app design:
Assets: Stores information about solar panels and wind turbines
Maintenance Requests: Tracks issues and maintenance activities. The table must include the following columns:
Request ID (auto-number)
External Request Code (text)

Assigned -
Technician (lookup to Technicians)
Report (lookup to Maintenance Reports)
Technician updated (Yes/No)
Maintenance Reports: Tracks the results of maintenance reports
Technicians: Stores technician assignment data. The table must include the following columns:
Full Name (Text)
Mobile phone number (Text)
Email (Text)
Seniority (Choice)
TechCheck ref (Text)

Data modeling -
The data model must provide the following functionality:
Maintenance Requests must:
be uniquely identifiable across systems.
have two inactive statuses, Cancelled and Duplicate.
If a new option is added to an existing set of options, it must be made available automatically for selection on all columns that use the set.
A new column named Priority must be added to multiple tables. Users must be able to select only one option from the following set per row:

Low -

Medium -

High -

Critical -
Changes to the Technician column on Maintenance Requests must be tracked for compliance purposes. Rows must include the names of previous and current technicians and the time of the change.

Relationship requirements -
One asset can be related to many maintenance requests. A maintenance request can have many assets.
A maintenance request can have only zero or one maintenance report.
Only one Technician can be related to a Maintenance Request at a time.
When a Maintenance Request is deleted, any Maintenance Reports associated with it must also be deleted, but this action should be prevented if there is value in the Technician lookup.
When a Maintenance Request is assigned to a different owner, the Maintenance Report associated with it must be reassigned to the new owner as well, but the associated Technician should stay with the current owner.

App design -
The Technicians table contains the following public views:

Senior Technicians -

Junior Technicians -
The Senior Technician view must be available through the table list view selector to a set of specific users only.
A tester creates a personal view named Hot Assets on the Assets table. The tester recognizes that the view is useful for the entire testing team. The view must be made accessible to the team.
You need to define the alternate key for the Technicians table by using the TechCheck ref column.
Which setting should you apply to the TechCheck ref column?

  1. AA. Required
  2. BB. Searchable
  3. CC. Column security
  4. DD. Auditing
Show answer & explanation

Correct answer: A

ExplanationAn alternate key requires the column to be set as Required so uniqueness can be enforced.
Reference:
https://learn.microsoft.com/en-us/power-apps/maker/data-platform/define-alternate-keys-entity

QUESTION 5

A company uses a model-driven app across multiple departments.
A public view intended only for managers currently exposes sensitive columns and filters to all users.
The view must meet the following requirements:
Restrict access to the specific public view to managers.
Display only context-relevant views for other users.
You need to configure view access.
What should you do?

  1. AA. Restrict the view by assigning it to the manager security role.
  2. BB. Configure table-level permissions for managers only.
  3. CC. Remove the view from the app navigation.
  4. DD. Set up the quick find view.
Show answer & explanation

Correct answer: A

ExplanationAssign the public view to the manager security role to restrict access while leaving other views available to other users.
Reference:
https://learn.microsoft.com/en-us/power-apps/maker/model-driven-apps/share-model-driven-app

QUESTION 6

You create a parent entity and a child entity. The parent entity has a 1:N relationship with the child entity.
You need to ensure that when the owner changes on the parent record that all child records are assigned to the new owner.
You need to configure the relationship behavior type.
What should you use?

  1. AA. Referential, Restrict Delete
  2. BB. Referential
  3. CC. Restrict
  4. DD. Parental
Show answer & explanation

Correct answer: D

ExplanationParental relationship behavior cascades ownership changes from the parent to child records.
Reference:
https://learn.microsoft.com/en-us/power-apps/maker/data-platform/create-edit-entity-relationships

QUESTION 7

A company tracks order processing duration using a model-driven app.
The company requires a system that provides the following functionality:
The age of the order, based on the created date, must be displayed on forms and views.
The value must update dynamically when viewed without storing the result.
The value must NOT be stored in the database.
You need to configure the column types.
Which two column types should you use? Each correct answer presents part of the solution.
NOTE: Each correct selection is worth one point.

  1. AA. Formula
  2. BB. Calculated
  3. CC. BigInt
  4. DD. Prompt
Show answer & explanation

Correct answer: A, B

ExplanationUse a formula or calculated column to compute age from Created On at read time without persisting the result as table data.
Reference:
https://learn.microsoft.com/en-us/power-apps/maker/data-platform/formula-columns

QUESTION 8

DRAG DROP -
You are designing a data model for a company. The model uses only standard Microsoft Dataverse tables.
You must extend the existing Accounts and Contacts tables to support the following business requirements:
Store an additional classification value on the Accounts table.
Add a field that indicates a customer’s engagement tier on the Contacts table.
Create a mechanism to improve lookup performance and ensure uniqueness across selected fields.
You need to modify the tables to support the business requirements.
Which components should you use? To answer, move the appropriate components to the correct requirements. You may use each component once, more than once, or not at all. You may need to move the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.

Item 1

  1. AA. Alternate key
  2. BB. Choice column
  3. CC. Lookup column
  4. DD. Customer column

Item 2

  1. AA. Alternate key
  2. BB. Choice column
  3. CC. Lookup column
  4. DD. Customer column

Item 3

  1. AA. Alternate key
  2. BB. Choice column
  3. CC. Lookup column
  4. DD. Customer column
Show answer & explanation

Correct answer: Item 1: B · Item 2: B · Item 3: A

ExplanationUse choice columns for the additional classification and engagement tier values. Use an alternate key to enforce uniqueness and improve lookup performance.
Reference:
https://learn.microsoft.com/en-us/power-apps/maker/data-platform/define-alternate-keys-entity

QUESTION 9

A company maintains a Power Platform solution that includes prompts, cloud flows, and Dataverse components. Multiple development teams are responsible for different features within the solution.
The development teams have the following requirements:
Teams must develop and update the same features independently.
Updates must not overwrite changes made by other teams.
Production deployments must remain controlled and predictable.
You need to recommend an ALM approach that supports independent development and controlled deployment in line with Microsoft best practices.
What should you recommend?

  1. AA. Create and maintain separate solutions in a single development environment. Deploy independently as managed solutions.
  2. BB. Make changes in a single solution. Deploy updates directly to production.
  3. CC. Create and maintain separate solutions in a separate development environment. Deploy independently as managed solutions.
  4. DD. Create unmanaged solutions in production. Merge changes during deployment.
Show answer & explanation

Correct answer: C

ExplanationUse separate solutions in a dedicated development environment and deploy them independently as managed solutions for controlled ALM.
Reference:
https://learn.microsoft.com/en-us/power-platform/alm/overview-alm

QUESTION 10

A company is designing a Power Platform solution that includes a model-driven app used by customer service representatives to manage support cases.
The company is evaluating which solution component to include in the app. The solution must meet the following requirements:
Users must interact with system-generated responses while working within forms and views.
Responses must reflect the current data and context in the app.
Users must remain within the app while interacting with the solution.
You need to recommend solution components for the app.
Which two components should you recommend? Each correct answer presents a complete solution.
NOTE: Each correct selection is worth one point.

  1. AA. Business rules
  2. BB. Copilot Studio agent
  3. CC. Smart assist
  4. DD. App assistant agent
Show answer & explanation

Correct answer: B, D

ExplanationCopilot Studio agents and the app assistant agent let users interact with contextual, system-generated responses inside the app.
Reference:
https://learn.microsoft.com/en-us/microsoft-copilot-studio/

QUESTION 11

HOTSPOT -
A company plans to use Microsoft Dataverse to manage sales opportunities. Records will contain confidential financial data that should only be accessible to specific groups of employees.
You have the following requirements:
Sales representatives must only view and update records they create.
Sales managers must have visibility into all opportunities within their organization.
You need to configure security.
Which configuration should you use? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.

Item 1

  1. AA. User-level access
  2. BB. Organization-level access
  3. CC. Team-level access

Item 2

  1. AA. Organization-level access
  2. BB. Parent: Child Business Unit-Level access
  3. CC. Business Unit-level access
Show answer & explanation

Correct answer: Item 1: A · Item 2: A

ExplanationUser-level access limits sales representatives to records they own. Organization-level access lets sales managers see all opportunities in the organization.
Reference:
https://learn.microsoft.com/en-us/power-platform/admin/wp-security-cds

QUESTION 12

A company uses Power Apps.
Users must be able to view only the address1 columns in the Account table.
You need to ensure other address columns are not visible to users when creating views and filters.
What should you do?

  1. AA. Use column-level security to remove read access to all users.
  2. BB. Create business rules to hide the other address columns.
  3. CC. Delete the other address columns from the table.
  4. DD. Disable the Search option for the columns.
Show answer & explanation

Correct answer: D

ExplanationDisable the Searchable option on the other address columns so they are not available in views and filters.
Reference:
https://learn.microsoft.com/en-us/power-apps/maker/data-platform/create-edit-fields

QUESTION 13

DRAG DROP -
An insurance company is implementing a customer service solution in Microsoft Dataverse to track interactions and manage issue resolution. The data model includes tables for customer information, support cases, and agents.
The data model includes the following requirements:
Link each support case to a customer.
Provide information on the children of customers.
Record history of agents assigned to customers.
You need to configure table relationships.
Which relationships should you use? To answer, move the appropriate relationship to the correct requirement. You may use each relationship once, more than once, or not at all. You may need to move the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.

Item 1

  1. AA. One-to-one
  2. BB. Connections
  3. CC. One-to-many
  4. DD. Many-to-many

Item 2

  1. AA. One-to-one
  2. BB. Connections
  3. CC. One-to-many
  4. DD. Many-to-many

Item 3

  1. AA. One-to-one
  2. BB. Connections
  3. CC. One-to-many
  4. DD. Many-to-many
Show answer & explanation

Correct answer: Item 1: C · Item 2: C · Item 3: B

ExplanationUse one-to-many relationships to link support cases to customers and to model parent-child customer records. Use Connections to track historical agent assignments.
Reference:
https://learn.microsoft.com/en-us/power-apps/developer/data-platform/connect-entities

QUESTION 14

DRAG DROP -
A company develops and deploys AI-enabled Power Platform solutions across multiple environments. Environment access is controlled through security groups.
The development team requires Power Platform environments to store, manage, and share the solutions across the company.
All developers require access to the same environment. The environment must be subject to ALM controls.
You need to set up the environments.
Which environment types should you use? To answer, move the appropriate environment types to the correct requirements. You may use each environment type once, more than once, or not at all. You may need to move the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.

Item 1

  1. AA. Default
  2. BB. Sandbox
  3. CC. Developer
  4. DD. Production

Item 2

  1. AA. Default
  2. BB. Sandbox
  3. CC. Developer
  4. DD. Production
Show answer & explanation

Correct answer: Item 1: B · Item 2: D

ExplanationUse a Sandbox environment to build and validate new features with ALM controls. Use a Production environment to host stable business workloads.
Reference:
https://learn.microsoft.com/en-us/power-platform/admin/environments-overview

QUESTION 15

A company uses Microsoft Dataverse to manage prospects. The company has a business process flow named BPFA that is associated with the Prospect entity to streamline the prospect management process.
You add a field named Category to the Prospect entity. You create additional business process flows. You apply the business process flows to Prospect records based on the selected category. Users can switch to any other newly configured business process flows but must not use BPFA.
You need to configure the solution.
What are two possible ways to achieve this goal? Each correct answer presents a complete solution.
NOTE: Each correct selection is worth one point.

  1. AA. Change the display order of the business process flows to move BPFA to the bottom of the list.
  2. BB. Use a business rule.
  3. CC. Deactivate BPFA.
  4. DD. Remove all of the privileges for BPFA.
Show answer & explanation

Correct answer: C, D

ExplanationDeactivate BPFA or remove privileges for BPFA to prevent users from using that business process flow.
Reference:
https://learn.microsoft.com/en-us/power-automate/business-process-flows-overview

QUESTION 16

A company is building a prompt about product specifications. The company plans to use the prompt in Power Automate.
The prompt must use Retrieval-Augmented Generation to ground the model with additional business information.
You need to select the available knowledge source for the prompt.
What should you use?

  1. AA. PDF document
  2. BB. PNG image
  3. CC. Dataverse table columns
  4. DD. Text
Show answer & explanation

Correct answer: A

ExplanationPDF documents can be used as a knowledge source for Retrieval-Augmented Generation in prompts.
Reference:
https://learn.microsoft.com/en-us/ai-builder/use-a-custom-prompt-in-flow

QUESTION 17

A company uses Dataverse to manage customer accounts and related transaction records.
The company requires the following functionality:
Reference a single related record without performing any aggregations.
Store the relationship as part of the table definition, so the platform automatically maintains the link between records.
You need to configure a column.
Which type of column should you configure?

  1. AA. Formula
  2. BB. Calculated
  3. CC. Rollup
  4. DD. Lookup
Show answer & explanation

Correct answer: D

ExplanationA lookup column references a single related record and is maintained by the platform as part of the table definition.
Reference:
https://learn.microsoft.com/en-us/power-apps/maker/data-platform/types-of-fields

QUESTION 18

A company is using a model-driven app to process orders. The company uses a custom integration to add orders to Microsoft Dataverse from two separate point-of-sale solutions.
Order numbers are stored in a column on an Order table named Number. The order numbers are prefixed with the value POS1- or POS2- depending on which point-of-sale system they originated from.
The company creates a calculated text column to store the clean order number. The clean order number must remove the point-of-sale system prefix.
You need to configure the action on the calculated column.
Which formula should you use?

  1. AA. CONCAT(Number, “4”)
  2. BB. TRIMLEFT(Number, 4)
  3. CC. TRIMLEFT(Number, 5)
  4. DD. TRIMRIGHT(Number, 5)
  5. EE. TRIMRIGHT(Number, 4)
Show answer & explanation

Correct answer: C

ExplanationTRIMLEFT(Number, 5) removes the five-character POS1- or POS2- prefix from the order number.
Reference:
https://learn.microsoft.com/en-us/power-apps/maker/data-platform/define-calculated-fields

QUESTION 19

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result these questions will not appear on the review screen.
A company uses a model-driven app.
The company must be able to dynamically control how components of the form behave as users interact with it. The solution must modify the form in real time while the user interacts with the interface.
You need to enforce client-side behavior dynamically.
Solution: Use business rules to show inline error messages.
Does the solution meet the goal?

  1. AA. Yes
  2. BB. No
Show answer & explanation

Correct answer: A

ExplanationBusiness rules can enforce client-side form behavior such as inline error messages in real time.
Reference:
https://learn.microsoft.com/en-us/power-automate/business-process-rules

QUESTION 20

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result these questions will not appear on the review screen.
A company uses a model-driven app.
The company must be able to dynamically control how components of the form behave as users interact with it. The solution must modify the form in real time while the user interacts with the interface.
You need to enforce client-side behavior dynamically.
Solution: Use Power Automate cloud flows to update column values.
Does the solution meet the goal?

  1. AA. Yes
  2. BB. No
Show answer & explanation

Correct answer: B

ExplanationCloud flows are not suitable for real-time client-side form interaction; they run asynchronously on the server.
Reference:
https://learn.microsoft.com/en-us/power-automate/overview

Build a focused AB-410 practice routine.

Choose AB-410 in Revizo and work through original, question-by-question practice on your iPhone. Review results, revisit what needs attention and keep your next session tied to one specific certification objective.

Practise AB-410 with Revizo

AB-410 practice questions.

Is Revizo the official Microsoft exam?

No. Revizo is an independent iPhone app for certification practice. Refer to the provider's official resources for current exam policies and registration.

How should I use these AB-410 practice questions?

Use the exam code to select the matching certification in Revizo, then build short, focused sessions around the areas you want to review.

Are Revizo questions copied from live examinations?

No. Revizo provides original practice questions for certification study. Use the provider's official objectives, documentation and policies as the source of truth for your preparation.

What should I use alongside AB-410 practice questions?

Use the current Microsoft objectives, documentation and registration guidance as your source of truth. Revizo is designed to support focused practice, not replace the provider's official materials.

Where can I confirm current AB-410 requirements?

Check the official Microsoft exam page for the latest objectives, registration details and policies.